All manuals

Wildlife Kit Card - Multiple Species

For: NA

The kit card connectors were designed to easily snap away, but for the cleanest finish it is recommended to use snips to remove them. Each animal may have a slightly different assembly, but the fundamentals remain the same amongst all of them.

Assembly Overview:

  1. Snap all connectors to free each piece
  2. Slide the ears into the cutout at the top of the head
  3. There are animals (such as the Lion and Gorilla) that use pegs and holes instead. For these you simply place the peg through the hole in the body and then squeeze the other side onto the peg.
  4. Slide the larger connector into the cutout at the front of the body
  5. Slide the smaller connector into the cutout at the back of the body
  6. Align to the two cutouts on the legs with the connectors and slide in
  7. Repeat for the last leg